62012 tkim/n1504 tsim tb-00000316/61899ts (koto) ta-1493 no.6005-1/7 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 CPH3106 bipolar transistor ? 12v, ? 3a, low v ce ( sat ) , pnp single cph3 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. applications ? relay drivers, lamp drivers, motor drivers, ash features ? adoption of mbit processes ? high current capacitance ? low collector-to-emitter saturation voltage ? high-speed switching ? ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) ? high allowable power dissipation speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo --15 v collector-to-emitter voltage v ceo --12 v emitter-to-base voltage v ebo -- 5 v collector current i c -- 3 a collector current (pulse) i cp -- 5 a base current i b --600 ma collector dissipation p c mounted on a ceramic board (600mm 2 0.8mm) 0.9 w junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7015a-003 ordering number : en6005b product & package information ? package : cph3 ? jeita, jedec : sc-59, to-236, sot-23 ? minimum packing quantity : 3,000 pcs./reel packing type: tl marking electrical connection 3 2 1 af lot no. tl 1 : base 2 : emitter 3 : collecto r cph3 2.9 0.05 0.4 2.8 1.6 0.2 0.6 0.6 0.9 0.2 0.15 2 1 3 0.95 CPH3106-tl-e
CPH3106 no.6005-2/7 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb = --12v, i e =0a --0.1 a emitter cutoff current i ebo v eb = --4v, i c =0a --0.1 a dc current gain h fe v ce = --2v, i c = --500ma 200 560 gain-bandwidth product f t v ce = --2v, i c = --500ma 280 mhz output capacitance cob v cb = --10v, f=1mhz 36 pf collector-to-emitter saturation voltage v ce (sat) i c = --1.5a, i b = --30ma --110 --165 mv base-to-emitter saturation voltage v be (sat) i c = --1.5a, i b = --30ma --0.85 --1.2 mv collector-to-base breakdown voltage v (br)cbo i c = --10 a, i e =0a --15 v collector-to-emitter breakdown voltage v (br)ceo i c = --1ma, r be = --12 v emitter-to-base breakdown voltage v (br)ebo i e = --10 a, i c =0a --5 v turn-on time t on see speci ed test circuit. 30 ns storage time t stg 90 ns fall time t f 10 ns switching time test circuit ordering information device package shipping memo CPH3106-tl-e cph3 3,000pcs./reel pb free i b2 i b1 input 50 v r 1k r l output v be =5v v cc = --5v --20i b1 =20i b2 =i c = --1.5a + + 220 f 470 f pw=20 s d.c. 1%
CPH3106 no.6005-3/7 i c -- v ce i c -- v ce it07987 it07988 h fe -- i c it07990 i c -- v be it07989 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --0.2 --0.4 --0.6 --0.8 --1.2 --1.4 --1.6 --1.8 --2.0 --1.0 0 --1 --2 --3 --4 -5 0 --20 --40 --60 --80 --120 --140 --160 --180 --200 --100 v ce = --2v 0 0 --0.2 --0.4 --0.6 --1.2 --1.0 --0.8 --0.5 --1.0 --1.5 --2.0 --3.5 --3.0 --2.5 v ce = --2v --0.01 --0.1 --1.0 --10 100 3 1000 23 57 23 57 23 57 5 7 2 3 5 7 collector current, i c -- a collector-to-emitter voltage, v ce -- v collector current, i c -- ma collector-to-emitter voltage, v ce -- v collector current, i c -- a base-to-emitter voltage, v be -- v collector current, i c -- a dc current gain, h fe i b =0 i b =0 --2ma --0.1ma --0.2ma --0.3ma --0.4ma --0.5ma --0.6ma --0.7ma --0.8ma --4ma --6ma --8ma --10ma --12ma --16ma --14ma v be (sat) -- i c it07993 it07994 v ce (sat) -- i c it07991 v ce (sat) -- i c it07992 --0.1 --1.0 5 23 57 23 57 23 i c / i b =20 --0.01 --0.1 --0.01 3 3 5 7 2 3 5 7 2 --0.1 --1.0 5 2 22 357 357 3 --0.01 --0.1 --0.01 5 2 3 2 3 5 7 i c / i b =50 --1.0 3 2 2 3 5 7 --0.01 --1.0 5 --0.1 23 57 23 57 23 f=1mhz 10 100 7 3 2 3 5 7 2 --1.0 --10 --0.1 23 57 23 57 23 5 cob -- v cb collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v output capacitance, cob -- pf collector-to-base voltage, v cb -- v collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v i c / i b =50
CPH3106 no.6005-4/7 a s o 1.0 0.9 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 p c -- ta 2 --10 3 5 7 2 3 5 7 3 5 7 --1.0 --0.1 2 357 2357 2 --1.0 --10 2 it07996 it07997 it07995 f t -- i c v ce = --2v 2 3 5 22 5 7 7357 23 57 3 3 100 7 --1.0 5 --0.01 --0.1 100ms dc operation 500 s 10ms 1ms i cp = --5a i c = --3a gain-bandwidth product, f t -- mhz collector current, i c -- a collector-to-emitter voltage, v ce -- v collector current, i c -- a ta=25 c single pulse mounted on a ceramic board (600mm 2 ? 0.8mm) ambient temperature, ta -- c collector dissipation, p c -- w mounted on a ceramic board (600mm 2 ? 0.8mm)
CPH3106 no.6005-5/7 embossed taping speci cation CPH3106-tl-e
CPH3106 no.6005-6/7 outline drawing land pattern example CPH3106-tl-e mass (g) unit 0.013 * for reference mm unit: mm 0.6 2.4 0.95 0.95 1.4
CPH3106 ps no.6005-7/7 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
